Quickstart Workflow for Multi-Entity Company In Sage Intacct

Keywords: Graphs, multi entity, Account, Sage, Sandboxes, Reports

Credit:–  Sage Photo By: FP

Struggling to Keep Your Books in Order? 📊📅

Let us handle the numbers while you focus on growing your business! Get expert bookkeeping support tailored to your needs.

👉 Click Here for a Free Consultation!

Quick Start Workflows

Quick Start templates contain built-in workflows that streamline business processes such as Order Entry and Purchasing. Workflows are based on transaction definitions. A graphic representation shows the workflow details on the application overview page. The workflow you see depends on the Quick Start used to set up the company and what action you’re taking. You can always create custom workflows if none of the default workflows are a good fit. To create custom workflows, enable Advanced workflows and create advanced transaction definitions. For example, if you began with one invoice, but now need two different invoices (product and services), you would enable Advanced workflows and create the transaction definition there.

Find the Quick Start used to create a company

To find out if your company was created using a Quick Start template, go to the Accounting tab on the Company information page (Company > Setup > Configuration > Company). If a template was used, the type appears in the Quick Start template field. If the field is blank, the company wasn’t set up using a template. If you want to take advantage of Quick Start elements, like account categories, be sure to use a template when you’re implementing a company. After a company has been set up, you can’t go back and choose a Quick Start or switch to a different one.

General template: Financial reports and graphs for the General Quick Start

If your company uses the General Quick Start template, you also have access to several out-of-box financial reports designed to fulfill basic reporting needs and serve as a basis for your own report and graph creation.

View and install reports

Intacct offers pre-made financial reports you can install from the financial reports library.

To view General financial reports:

  • Go to General Ledger > All > Financial reporting > Financial reports.
  • Select QuickStart library to view all financial reports included with the General QuickStart.

To install financial reports:

  • Go to General Ledger > All > Financial reporting > Financial reports, then select Quick Start library on the upper right of the page.
  • Optionally select Layout to see what the report contains.
  • Select Install next to a report you want to install.
  • Optionally, change the Report name to the report name you want to appear in your company.
  • Select Save.
  • When you’re finished, select Done to return to the reports library. The installed reports appear in your Financial reports list.

View and install graphs

We also offer premade financial graphs which you can install from the financial graphs library.

To view General financial graphs:

  • Go to General Ledger > All > Financial reporting > Financial graphs.
  • Select Quick Start library to view all graphs included with the General Quick Start.

To install financial graphs:

  • Go to General Ledger > All > Financial reporting > Financial graphs.
  • Select QuickStart library.
  • Select Install along the same row as the graph you want to install.
  • Optionally, change the name of the graph, then select Save.
  • When you’re done, select Done to return to the Financial graphs list and find the graph there.

Configure graphs

If you choose to use these graphs, you may have to set the dimension filter to reflect how your company uses dimensions. To set a dimension filter on a graph:

  • Go to General Ledger > All > Financial reporting > Financial graphs.
  • Select Edit beside the graph to which you want to add dimension filters.
  • Select the Filters dropdown to expand the Filters section.
  • Set your dimension filters as needed.
  • Select Save.

Nonprofit template: Financial reports and graphs for nonprofit organizations

If your organization uses the Nonprofit Quick Start template, then you also have access to several out-of-box financial reports designed to help you comply with the FASB report formats and guidelines quickly and easily.

View and install reports

To help you comply with report formats, we offer pre-made financial reports you can install from the financial reports library.

To view Nonprofit financial reports:

  • Go to General Ledger > All > Financial reporting > Financial reports.
  • Select Quick Start library to view all financial reports included with the Nonprofit Quick Start.

To install financial reports:

  • Go to General Ledger > All > Financial reporting > Financial reports, then select Quick Start library on the upper right of the page.
  • Optionally select Layout to see what the report contains.
  • Select Install next to a report you want to install.
  • Optionally, change the Report name to the report name you want to appear in your company.
  • Select Save.
  • When you’re finished, select Done to return to the reports library. The installed reports appear in your Financial reports list.

Configure reports

If you choose to use these reports, some may require additional configuration after installation. Follow the directions in the Configuration task table to complete your configuration for the following reports: Since nonprofit organizations are all configured in different ways to meet each organization’s needs, most reports, including reports not listed below, need some additional configuration in terms of filtering for the right dimensions.

  • Statement of activities: 958 format
  • Statement of activities: 117 format
  • Investments footnotes 2
  • Investments footnotes 3
  • 990IX Statement of functional expenses
  • 990VIII Statement of revenue

Organizations are implemented to track dimensions in a way deemed best to fit their specific needs, resulting in variation in how organizations are configured. Therefore, before you begin making changes to restrictions in these account groups and reports, be sure you know how your organization uses and applies Restriction tracking.

View and install graphs

We also offer premade financial graphs which you can install from the financial graphs library:

  • Cash balance: weekly
  • Net assets
  • Operating expense by function
  • Revenue

To view Nonprofit financial graphs:

  • Go to General Ledger > All > Financial reporting > Financial graphs.
  • Select Quick Start library to view all graphs included with the Nonprofit Quick Start.

To install financial graphs:

  • Go to General Ledger > All > Financial reporting > Financial graphs.
  • Select Quick Start library.
  • Select Install along the same row as the graph you want to install.
  • Optionally, change the name of the graph, then select Save.
  • When you’re done, select Done to return to the Financial graphs list and find the graph there.

Services template: Financial reports and graphs for the service industry

If your company uses the Services Quick Start template, you have access to several financial reports designed to fulfill industry-wide needs and serve as a basis for your own report and graph creation.

View and install reports

Intacct offers pre-made financial reports you can install from the financial reports library.

To view Services financial reports:

  • Go to General Ledger > All > Financial reporting > Financial reports.
  • Select Quick Start library to view all financial reports included with the Services Quick Start.

To install financial reports:

  • Go to General Ledger > All > Financial reporting > Financial reports, then select Quick Start library on the upper right of the page.
  • Optionally select Layout to see what the report contains.
  • Select Install next to a report you want to install.
  • Optionally, change the Report name to the report name you want to appear in your company.
  • Select Save.
  • When you’re finished, select Done to return to the reports library. The installed reports appear in your Financial reports list.

View and install graphs

We also offer premade financial graphs which you can install from the financial graphs library.

To view Services financial graphs:

  • Go to General Ledger > All > Financial reporting > Financial graphs.
  • Select Quick Start library to view all graphs included with the Services Quick Start.

To install financial graphs:

  • Go to General Ledger > All > Financial reporting > Financial graphs.
  • Select Quick Start library.
  • Select Install along the same row as the graph you want to install.
  • Optionally, change the name of the graph, then select Save.
  • When you’re done, select Done to return to the Financial graphs list and find the graph there.

Configure graphs

If you choose to use these graphs, you may have to set the dimension filter to reflect how your company uses dimensions.

To set a dimension filter on a graph:

  • Go to General Ledger > All > Financial reporting > Financial graphs.
  • Select Edit beside the graph to which you want to add dimension filters.
  • Select the Filters dropdown to expand the Filters section.
  • Set your dimension filters as needed.
  • Select Save.

Sandboxes

If you have a small company, you can manage your sandboxes through the Sandboxes page. There’s a company size restriction for sandbox self-service. As your company grows, you might lose the ability to access the Sandboxes page. If this happens, you’ll need to log a provisioning case to add, delete, or refresh sandboxes. To log a provisioning case, go through the usual steps to log a support case but choose the Feature Request option. A sandbox is a copy of your production environment that you can use for testing or training purposes without affecting the data or configuration of your production environment.

Prerequisites

At this time, sandbox automation features are only available for new direct customers with a small tenant size. Sandbox automation is not available to customers with consoles or customers who have purchased Intacct through a partner. To confirm your eligibility for sandbox automation or to verify your tenant size, log a provisioning case. To log a provisioning case, go through the usual steps to log a support case but choose Feature Request instead of Support Case. Specify that the type of case is Sandbox. Provisioning will let you know if your company is too large to qualify.

Details

  • Sandboxes last for the duration of the billing cycle.
  • Sandboxes can be created and refreshed up to 4 times each, annually.
  • A service request can be submitted to open a support case for five or more refreshes in 1 year.
  • If there are multiple sandbox licenses, then refreshes roll over to other company sandboxes. For example, if there are 2 sandbox licenses and one sandbox reaches its refresh limit and the other still has refreshes available, the available refreshes can be applied to either sandbox.
  • Deleting a sandbox and creating it again counts as 1 refresh.
  • The following applications, add-ons, and functionality are not available in sandboxes:
  • Interactive Visual Explorer
  • Interactive Custom Report Writer
  • Fixed Assets, Collections, and Prepaid Expense Amortization modules
  • Sage Intacct Mateo
  • Advanced Audit Trail
  • Electronic payment services like Vendor Payments powered by CSI

Sandbox list

This list supports the enhanced lists interface. A sandbox is a copy of your production environment that you can use for testing or training purposes without affecting the data or configuration of your production environment. You can view and manage your list of sandboxes in the Sandboxes page. If you have a small company, you can manage your sandboxes through the Sandboxes page. There’s a company size restriction for sandbox self-service. As your company grows, you might lose the ability to access the Sandboxes page. If this happens, you’ll need to log a provisioning case to add, delete, or refresh sandboxes. To log a provisioning case, go through the usual steps to log a support case but choose the Feature Request option.

Go to Company > Admin > and select Sandboxes. The sandboxes page appears.

From this page you can create, log in, refresh, and delete sandboxes, and view and edit sandbox details.

Add a sandbox

A sandbox is a copy of your production environment that you can use for testing or training purposes without affecting the data or configuration of your production environment.

Prerequisites

At this time, sandbox automation features are only available for new direct customers with a small tenant size. Sandbox automation is not available to customers with consoles or customers who have purchased Intacct through a partner. To confirm your eligibility for sandbox automation or to verify your tenant size, log a provisioning case.

To log a provisioning case, go through the usual steps to log a support case but choose Feature Request instead of Support Case. Specify that the type of case is Sandbox. Provisioning will let you know if your company is too large to qualify.

  • Go to Company > Admin > and select
  • Add
  • next to Sandboxes.
  • Enter a Name for the sandbox. The name is automatically appended with “-sandbox”.
  • Enter a Description.

After you save the sandbox, the name appears on the Sandboxes list with a state of Pending. As creation begins, the state changes to In progress. After the sandbox is created, its state changes to Ready. When the sandbox is ready, you can log in to it from the Sandboxes page and edit or view the details or refresh or delete it.

The new sandbox is valid until the end of the billing cycle.

Log in to a sandbox

If you have a small company, you can log into your sandbox through the Sandboxes page. There is a company size restriction to access the Sandboxes page. As your company grows, you might lose the ability to access it. If this happens, you can still log into your sandbox using the Intacct home page.

  • Go to Company > Admin > Sandboxes.
  • In the appropriate row, select the Login link.

If you have a small company, you can manage your sandboxes through the Sandboxes page. There’s a company size restriction for sandbox self-service. As your company grows, you might lose the ability to access the Sandboxes page. If this happens, you’ll need to log a provisioning case to add, delete, or refresh sandboxes. To log a provisioning case, go through the usual steps to log a support case but choose the Feature Request option.

Log in using the Intacct home page

The Company ID for your sandbox is typically your company name with -sandbox appended to the end. For example, if your company name is Example Company, then the name of the sandbox would likely be Example Company-sandbox. Log in to your sandbox using the same User ID and Password that you use with your company.

Edit a sandbox

A sandbox is a copy of your production environment that you can use for testing or training purposes without affecting the data or configuration of your production environment. If you have a small company, you can manage your sandboxes through the Sandboxes page. There’s a company size restriction for sandbox self-service. As your company grows, you might lose the ability to access the Sandboxes page. If this happens, you’ll need to log a provisioning case to add, delete, or refresh sandboxes. To log a provisioning case, go through the usual steps to log a support case but choose the Feature Request option.

View a sandbox

In View mode, you can see the sandbox name, description, state, and expiration date.

  • Go to Company > Admin > Sandboxes.
  • Select View beside the appropriate sandbox.

Edit a sandbox

In Edit mode, the elements you can edit depend on the sandbox state:

  • Pending: You can edit the name and description.
  • In progress: You can edit the description only.
  • Ready: You can edit the description only.

To edit a sandbox:

  • Go to Company > Admin > and select Sandboxes.
  • Select Edit beside the appropriate sandbox.

Delete a sandbox

Because a sandbox is a copy of your production company, deleting one has no effect on the data or configuration of your production environment. If you have a small company, you can manage your sandboxes through the Sandboxes page. There’s a company size restriction for sandbox self-service. As your company grows, you might lose the ability to access the Sandboxes page. If this happens, you’ll need to log a provisioning case to add, delete, or refresh sandboxes. To log a provisioning case, go through the usual steps to log a support case but choose the Feature Request option.

  • Go to Company > Admin > Sandboxes.
  • Select Delete beside the appropriate sandbox.

After the sandbox is deleted, it’s no longer available.

Deleting a sandbox and then re-adding one uses up one of your refresh allocations.

Refresh a sandbox

A sandbox is a copy of your production environment that you can use for testing or training purposes without affecting the data or configuration of your production environment. Refreshing a sandbox results in an up-to-date copy of your production environment. If you have a small company, you can manage your sandboxes through the Sandboxes page. There’s a company size restriction for sandbox self-service. As your company grows, you might lose the ability to access the Sandboxes page. If this happens, you’ll need to log a provisioning case to add, delete, or refresh sandboxes. To log a provisioning case, go through the usual steps to log a support case but choose the Feature Request option.

When to refresh

As work continues in your production environment, and changes occur, such as added records, subscriptions, or features, your sandbox can become out of date. Refreshing the sandbox reflects your production environment changes.

The name of the refreshed sandbox remains the same.

Restrictions

  • Sandboxes can be created and refreshed up to 4 times each, annually.
  • A service request can be submitted to open a support case for five or more refreshes in 1 year.
  • With multiple sandbox licenses, remaining refreshes are available for use on any sandbox that has not reached its refresh limit.
  • Deleting a sandbox and creating it again counts as 1 refresh.
  • Changes made to the sandbox before it’s refreshed are not copied over to the refreshed sandbox.

Deleting a sandbox and then re-adding it uses up a refresh.

To refresh a sandbox

  • Go to Company > Admin > Sandboxes.
  • Select Refresh beside the appropriate sandbox in the list.
    A dialogue opens and shows your remaining refreshes or indicates if you need to request more.

A service request can be submitted to open a support case for more refreshes.

After you select Refresh, the sandbox goes through the following states:

  • Pending as soon as you refresh the sandbox.
  • In progress after the refresh begins.
  • Ready after the refresh is complete.
    Your remaining refresh count is updated when the refreshed sandbox is ready.

The sandbox now reflects any changes made to your production environment.

Check out our Free Additional Articles